Products

Splash fills are good for dirty water application and offer low pressure drop. Below available splash fills are used for “Nirvana” cooling towers:

(i) Wooden Splash Bar: Chemically treated wooden bars used for cross-flow cooling tower.

(ii) PVC ‘V’-Bar: PVC ‘V’ Bars makes small droplets by splashing and shearing of water drops which produce better heat transfer efficiency. Used both for cross-flow and counter-flow cooling tower & suitable for turbid water application.

(iii) Opti-Grid: Opti-Grid is a direct replacement of splash fill for use in cross-flow and counter-flow towers where dirty water is concern. Opti-grid utilizes a floating hanger design that allows the fill layers to float for excellent fit in slanted cross-flow designs. This design offers reduced pressure drop, improved splash surface, non-fouling ability and maximum strength. Good for sea water and turbid water.

(iv) TURBO Splash PAC: Due to innovative design, there is no risk for the fills getting chocked, less resistance to the passage of air allows energy saving. Suitable both cross-flow and counter-flow cooling tower and any type of water quality including sea water.

“Drift” is the undesirable loss of liquid water to the environment via small droplets that become entrained in the leaving air stream. These water droplets carry with them chemicals and minerals thus impacting the surrounding environment.

“Nirvana” uses profile or cellular both type eliminator to ensure maximum removal of water droplets from air stream to limit the drift rate upto 0.005% of circulating water flow rate. With low drift rate, the “Nirvana" cooling tower saves valuable water and water treatment chemicals.

The drift eliminators are constructed of polyvinyl chloride (PVC) plastic material which effectively eliminates corrosion of these vital components. They are assembled in sections to facilitate easy removal for inspection and maintenance of the water distribution system and top of the fill area.